Клиент версии 7, Новости о седьмой версии клиента |
Привіт Гість ( Вхід | Реєстрація )
Клиент версии 7, Новости о седьмой версии клиента |
huangdi |
Jun 27 2010, 06:17
Пост
#1
|
мрію про ферму... Група: Trusted Members Повідомлень: 183 З нами з: 17-September 09 Користувач №: 1 166 Стать: Чол Парк машин: i5@3.6 + GTX260 |
Клиент версии 7
ЗАГРУЗИТЬ: LINK ИНСТАЛЯЦИЯ: [SMP] [GPU] [COMPLETE] ФАК по настройке от Омега.зп: https://distributed.org.ua/forum/index.php?...indpost&p=81091 В официальном блоге прочитал сегодня очень интересную новость. В первых выпусках не будет всего, о чем просили фолдеры, но значительные изменения будут. Например, интеграция классического, SMP и GPU-клиентов, возможность единого клиента подключать все эти ресурсы (многоядерный ЦП + GPU) одновременно, упрощенный и более надежный GUI, улучшенные и более продвинутые средства для сторонних разработчиков, а со временем и возможность использовать клиент FAH для простого управления несколькими ПК. Консольная версия седьмого клиента прошла внутреннее тестирование, и мы начинаем ограниченный выпуск альфа-версии. Все еще требуется много доработок, но я рад, что мы сделали такой большой шаг вперед. Если не будут выявлены критические ошибки, надеюсь, что через месяц-другой мы сможем выпустить этот клиент для открытого бета-тестирования. Це повідомлення відредагував nikelong: May 23 2011, 00:18 |
Paul B.Atton |
Sep 3 2010, 15:46
Пост
#2
|
Випадковий перехожий Група: Trusted Members Повідомлень: 3 510 З нами з: 26-August 03 З: місто Київ Користувач №: 10 Стать: Чол Free-DC_CPID Парк машин: Різні процесори різних архітектур (x86, SPARC, Power) від 300 МГц до 3200 МГц jabber:Paul.Tatarenko@gmail.com |
Ще не почалос я тестування?
-------------------- |
KING100N |
Sep 3 2010, 16:04
Пост
#3
|
кранчер з фермою Група: Trusted Members Повідомлень: 747 З нами з: 17-October 08 Користувач №: 847 Стать: Чол |
-------------------- |
KING100N |
Dec 23 2010, 07:10
Пост
#4
|
кранчер з фермою Група: Trusted Members Повідомлень: 747 З нами з: 17-October 08 Користувач №: 847 Стать: Чол |
Анонс клиента версии 7 - ориентировочно 1й квартал 2011 QUOTE It is now official, Vijay Pande has announced that the v7 client has a target release date, namely the first quarter of 2011. Of course, this gives a wide range for the release, and last minute bugs may well appear that may delay the release beyond the target date. However the fact that a date has been announced in advance at all is a good sign that no such issues are expected. To recap, the new client has been designed with usability in mind. The current clients might best be described as functional, and the new client is intended to address the usability deficiencies and make contributing much easier. For the developers, the new code is intended to be much easier to maintain and more logical to add to, allowing faster development of further improvements. As a result it should be easier for the client to be modified to support new client types or methods than it has been with the current clients. We will keep you updated of any news on this release. -------------------- |
omega.zp |
Dec 23 2010, 10:41
Пост
#5
|
Anquietas Група: Trusted Members Повідомлень: 658 З нами з: 11-December 10 З: ON, Toronto Користувач №: 1 553 Стать: Чол |
Большие надежды на новый клиент! В ожидании чуда...
-------------------- |
omega.zp |
Mar 15 2011, 17:30
Пост
#6
|
Anquietas Група: Trusted Members Повідомлень: 658 З нами з: 11-December 10 З: ON, Toronto Користувач №: 1 553 Стать: Чол |
Progress to the v7 client release
There has been a lot of work on v7 behind the scenes. Clearly it's taken longer than we'd like, but I wanted to give an update on where we are. Our lead developer, Joseph Coffland, has been working to add requested features and squash bugs reported by testers. There's been numerous examples of this, so too many for me to detail one by one, but I'm attaching the v7 client change log to give some rough idea of the type of code development tasks that have been going on. Joe and I think we're close and if 7.1.18 looks good in internal testing, it will likely become the basis of the client released for a public release beta client. CHANGELOG: (Show/Hide) уже скоро, ченжлог впечатляет -------------------- |
KING100N |
Mar 16 2011, 01:41
Пост
#7
|
кранчер з фермою Група: Trusted Members Повідомлень: 747 З нами з: 17-October 08 Користувач №: 847 Стать: Чол |
omega.zp Переведу на русский и добавлю
Появились две новые записи в блоге Панде от 14 и 15 марта. В первой говорится о том, что доктора довольны последней версией клиента 7 (7.1.18) и она вполне может стать публичной бета-версией. Во второй - что новое ядро ATI (16) уже вовсю тестится и будет выпущено следом за 7 версией клиента. Но, похоже, наилучшими для счета окажутся 5ххх и выше серии (3ххх не поддерживает OpenCL, 4ххх - не достаточно хорошо). Поддержка же старого ядра (11) планируется до 11 сентября 2011. -------------------- |
omega.zp |
Mar 26 2011, 19:03
Пост
#8
|
Anquietas Група: Trusted Members Повідомлень: 658 З нами з: 11-December 10 З: ON, Toronto Користувач №: 1 553 Стать: Чол |
ATI/AMD GPU support in FAH, and what awaits with Core 16
The project team is currently working on improved support for AMD and ATI GPUs. Originally, the Brook programming language was used to program on GPUs, but AMD have decided to support just OpenCL and drop all support for Brook. This has meant that the core has had to be completely rewritten to use OpenCL instead of Brook. This was a huge challenge, but that project is now bearing fruit (see the OpenMM site for more information). Because of AMD's decision to abandon support for Brook in favour of OpenCL, future developments of the AMD/ATI core will be made for OpenCL only, and will only run on graphics cards that support OpenCL. This means that some currently supported cards will drop out of the project, as follows: HD2xxx and HD3xxx series do not support OpenCL and thus will not be supported once FAHcore 11 is mothballed. HD4xxx series is able to execute OpenCL code but lacks some hardware features necessary to make the new code run at an efficient speed, and so will also not be supported by the new core. HD5xxx and HD6xxx series support the full range of necessary OpenCL functions, and will be fully supported by the new core. In the short term, both FAHcore 11 and FAHcore 16 will be used in parallel so as not to leave people in the lurch. Unfortunately this situation cannot last forever, and support for FAHcore 11 is scheduled to end on September 1st 2011. This date may be postponed, but there is no guarantee that will happen. Stopping support of a platform is obviously never a popular decision, but in this instance the project has been left with little choice due to AMD ending support for the older cards. The good news is that AMD/ATI is heavily involved in supporting OpenCL and the Pande Group are very excited by the prospects of the new core. This core will be released publicly after the release of the v7 client, which is necessary to run the new core. -------------------- |
pxx |
Mar 29 2011, 17:36
Пост
#9
|
Соромлюсь щось писати Група: New Members Повідомлень: 14 З нами з: 1-February 11 Користувач №: 1 607 Стать: Чол Парк машин: i7 860@2.8 + GeForce 8400 GS, Athlon 4400+ + ATI HD3870 |
Уже вышел в публичную бету.
http://folding.typepad.com/news/2011/03/cl...-open-beta.html https://fah-web.stanford.edu/projects/FAHCl...iki/BetaRelease Переведу про новые фишки: — Улучшенный инсталлятор с поддержкой Windows XP, Vista, 2008, Seven. — Инсталлятор для 64-bit OS-X. (32-bit в разработке). — Пакеты для Debian/Ubuntu и RedHat/Fedora/CentOS 32/64-bit. — Более совместимый и стабильный 3D вьювер протеина с несколькими режимами просмотра, возможностью вращения, уменьшения/увеличения, онлайн-помощью плавной анимацией протеинов. — Отдельный, но интегрированный консольный клиент (FAHClient), интерфейс управления(FAHControl) и 3D вьювер протеинов (FAHViewer). — Режимы интерфейса для новичков, продвинутых и экспертов. (Выпадающее меню в FAHControl.) — Поддержка нескольких слотов (UNI, SMP or GPU). — Возможность мониторинга и конфигурации удаленных клиентов с одного компьютера. — Очень низкий потребление процессорного времени для FAHClient, FAHControl и FAHViewer. Потребление процессорного времени 3D вьювером может быть минимизировано выключением вращения и анимации протеинов в настройках. — Единый клиент для классического однопроцессорного, SMP (Multiple CPUs) и GPU (Graphics Processors) фолдинга. Вечером буду пробовать устанавливать дома. |
omega.zp |
Mar 29 2011, 18:32
Пост
#10
|
Anquietas Група: Trusted Members Повідомлень: 658 З нами з: 11-December 10 З: ON, Toronto Користувач №: 1 553 Стать: Чол |
Дождались таки. Сегодня как раз бж сдаю, затестю...
-------------------- |
KING100N |
Mar 29 2011, 22:23
Пост
#11
|
кранчер з фермою Група: Trusted Members Повідомлень: 747 З нами з: 17-October 08 Користувач №: 847 Стать: Чол |
У кого радики есть? Потестите на новом клиенте. Говорят, 7500 ппд с 5850 снимают
UPD мда, похоже, чуда не случилось: 6870 (960MHz) - 7700 6950 (800MHz) - 7400 5870 (950МHz) - 9400 5770 (850MHz) - 6000 -------------------- |
omega.zp |
Mar 30 2011, 07:48
Пост
#12
|
Anquietas Група: Trusted Members Повідомлень: 658 З нами з: 11-December 10 З: ON, Toronto Користувач №: 1 553 Стать: Чол |
Ночью поставил, ну что сказать... Это всего то новая оболочка, ядра все старые(не считая 16ого)... Интересно, а 16ое ядро только для радиков? А то думаю поставить его...
Бльоооооооооо, а куда бигадв и прочие заклинания вписывать??? QUOTE 6870 (960MHz) - 7700 6950 (800MHz) - 7400 Тута ошибки нету? -------------------- |
pxx |
Mar 30 2011, 09:21
Пост
#13
|
Соромлюсь щось писати Група: New Members Повідомлень: 14 З нами з: 1-February 11 Користувач №: 1 607 Стать: Чол Парк машин: i7 860@2.8 + GeForce 8400 GS, Athlon 4400+ + ATI HD3870 |
Ночью поставил, ну что сказать... Это всего то новая оболочка, ядра все старые(не считая 16ого)... Так и задумано же. This is a new client, not new FahCores. With the exception of FahCore_16, you'll still get assignments of the same projects and will earn exactly the same PPD. |
SlavaAltus |
Mar 30 2011, 10:13
Пост
#14
|
кранчер зі стажем Група: Trusted Members Повідомлень: 389 З нами з: 9-February 10 З: Украина, Киев Користувач №: 1 302 Стать: Чол Free-DC_CPID Парк машин: 8-10 cores 24/7 (up to 30-40 cores some times) |
UPD: Писец, непонятно чего я втулил эту фразу, хотел просто написать - жалко, не буду тратить время на закачку ((... -------------------- (Show/Hide) Водку на работе пить не дают!, дома не дают драть обои... чё за фигня ваще((.. ?! |
KING100N |
Mar 31 2011, 21:34
Пост
#15
|
кранчер з фермою Група: Trusted Members Повідомлень: 747 З нами з: 17-October 08 Користувач №: 847 Стать: Чол |
-------------------- |
Lo-Fi Версія | Поточний час: 26th September 2024 - 19:16 |